- Home
- /
- SERVICES
MICROREL Services for High-Reliability Electronics and RF Microwave parts for Space & Military applications.
MMIC Circuits Design & GaAs/Gan Foundery services
- MMIC – Monolithic Microwave IC (1-100GHz) from L-band to V-band in GaAs and GaN
- GaAs and GaN MMIC fabrication process & comparison of other technologies
- MMIC (Monolithic Microwave Integrated Circuit) Foundry
- Layout considerations, Simulation & modelling
- Passive circuit design – filters, couplers, splitters, baluns
- Active circuit design – amplifiers, switches, attenuators, phase shifters
- RF On-Wafer (RFOW) test and measurement
- CAD tools for circuit design Standard Simulations
- DFM (Design For Manufacturing) for production Yield optimization
RF and Microwave circuits Design
Frequency bands spans from 100MHz up to 94GHz with different technologies:
- RF PCB
- Alumina, LTCC, Thick Film Hybrids
- GaAs, GaN MMIC
- Electric, Electromagnetic, Mechanical and Environmental simulations are the basis of Wave Design Cycle.
- Defence: airborne, trucks, missiles. MIL standard compliant hardware
- Space: on-board and ground segmend equipment. ESA ECSS compliance
- Telecom and Industrial: CE marking, RED compliance.
- Part Management Plan
- Procurement Spacification preparation
- Parts Radiation Assesments & Plans (TID, SEE, SEU, SEL)
- Parts Upscreening / Upgraditing
- Parts Quality Veririfcations (LAT/QCI)
- Customer Source Inspecions – PRECAP Inspections & Final CSI
- Obsolescence Parts Management and alternative solutions
- Prohibited Components definition
- PAD (Parts Identification Documents)
- Manufacturer & Technology Assessment
- Construction Analysis
- Radiation TID/SEE/SEL Assesssment
E.E.E. Parts Laboratory Services
Technological Laboratories and Expert Engineers in HI-REL, ALTER laboratory services cover from parts procurement to equipment testing, including radiation, packaging design, and assembly, screening, destructive physical analysis, qualification, environmental testing, failure analysis, obsolescence management, evaluation of counterfeits and many more.
- Acceptance Tests
- C-SAM – Scanning Acoustic Microscopy
- Failure Analysis
- Engineering And Testing
- Evaluation / Qualification
- Optoelectronics Components Testing
- Authenticity Test Lab
- Material & Processes Laboratory
- Microsectioning Testing
- Microwave and RF Testing
- Screening Procedures
- Steps to procurement
- Small Sats Testing
- Counterfeit Components Detection
- Relifing Evaluation
- Radiation Testing
- Vibration Testing
- Logistics & Long Term Storage
- COTS components testing
- Electrical Test
- Non Standard Testing
ASIC & SOC Design Developments
We work on the development of Digital, Analog, Mixed or RF ASICs, for circuits such as 3G, 4G LTE modems, chip companions, video encoder, TV decoder, Bluetooth, UWB, Zigbee, CMOS, CCD and infrared imaging, audio, power management, Quad band Transceiver…, on CMOS, SOI technologies, with increasingly small structures (45, 32 and 28 nm).
DIGITAL & ANALOG ASIC & SOC
- Architectures, Modeling VHDL, VERILOG
- Simulations and syntheses
- Functional (C, UVM, System Verilog, etc.) and formal verifications
- DFT (Scan, Bist, ATPG, …)
- Back End (P&R)
- Prototyping on FPGA (Zebu, Prodesign, etc.)
- Schematic design
- Simulations
- Layout
- Measurements and Characterization
For additional Support or rquirements please contact us.
CONTACT MODULE
Linecard
ESA NEWS
- Einstein Probe opens its wide eyes to the X-ray sky 27/04/2024
- Start of the first Ariane 6 launch campaign 26/04/2024
- Week in images: 22-26 April 2024 26/04/2024
LEONARDO NEWS
- Qatar Emiri Air Force and Leonardo celebrate 2,500 flight hours of the NH90 helicopter fleet 05/03/2024
- Leonardo to equip Canadian Armed Forces with counter-drone technology 28/02/2024
- LEONARDO and SLOANE strengthen partnership in the UK and Ireland commercial helicopter market with AW09 and AW109 types deals 28/02/2024