+39 334 9529 414

First Space-qualified European FPGA: NG-MEDIUM

First Space-qualified European FPGA: NG-MEDIUM

  1. Home
  2. /
  3. POSTS
  4. /
  5. Technology
  6. /
  7. First Space-qualified European FPGA:...

NanoXplore 65nm NG-MEDIUM FPGA ESCC QPL certification.

This certification is a result of a productive collaboration between NanoXplore, ST Microelectronics, National Centre for Space Studies (CNES), European Space Agency (ESA) and European Commission (EC).

Radiation Tolerance

  • Radiation hardening by design in configuration memories and registers.
  • SEL immune up to LET > 60MeV.cm2/mg.
  • Device Configuration SER < 1.70 10-4/day (GEO)
  • Total ionizing dose > 100Krads.
  • Embedded EDAC for user memory mitigation.
  • Embedded configuration memory scrubbing.
  • Fast automatic memory configuration repair.
  • Embedded bitstream integrity check (CMIC).

Main Features

  • 65 nm STm C65-SPACE process technology.
  • 4-Input Look-up tables.
  • Lut expender to support up to 16 bits boolean functions.
  • High performance carry chains.
  • Advanced interconnect network to support random logic and coarse grain block functions.
  • DSP Blocks for complex arithmetic operations.
  • User memories with variable width and depth.
  • 5 configuration modes: JTAG, Parallel 8 bits, Parallel 16 bits, Serial dump bus, Space Wire.
  • Integrated Space Wire interface available for user applications.
  • Dedicated lowskew distribution network for clock, reset and load enable signals.
  • On-chip thermal monitoring capability.

Input / Output Features

  • Multiple I/O powering support from 1.8V to 3.3V
  • Cold sparing support.
  • Programmable output drive to support multiple industry standards.
  • Embedded logic to support DDR2 and DDR3.
  • 800 Mbps I/O support.
  • LVDS compatible mode.
  • All pins support 2000V of ESD-HBM.
  • Embedded logic to support Space Wire Data Strobe encoding.
  • Programmable delay lines on all pins.
  • Programmable resistive termination.

For more details: www.nanoxplore.com

Contact for Italy: Mr. DANILO LAUTA 
Via Guido Rossa 34, CP.00065 – Fiano Romano, ROME, ITALY

In Partnership with:
  Rosenheimer Landstraße 117, D-85521 Ottobrunn-Riemerling, Germany